Disco disk – Disc Shelf http://disc-shelf.com/ Tue, 20 Jul 2021 09:49:46 +0000 en-US hourly 1 https://wordpress.org/?v=5.8 https://disc-shelf.com/wp-content/uploads/2021/05/cropped-icon-32x32.png Disco disk – Disc Shelf http://disc-shelf.com/ 32 32 Top 10 DJs in the world who have reigned in the industry for decades https://disc-shelf.com/top-10-djs-in-the-world-who-have-reigned-in-the-industry-for-decades/ https://disc-shelf.com/top-10-djs-in-the-world-who-have-reigned-in-the-industry-for-decades/#respond Sat, 17 Jul 2021 05:59:20 +0000 https://disc-shelf.com/top-10-djs-in-the-world-who-have-reigned-in-the-industry-for-decades/ Tthere have been a lot of trends, movements and revolutions in music that have changed everything. With the rapidly changing world, many dynamic genres have emerged and evolved. Among all, the Disk Jockey changed the world forever. He’s a jockey, the DJ who would introduce old tracks with a modern, upbeat twist like a remix. […]]]>


Tthere have been a lot of trends, movements and revolutions in music that have changed everything. With the rapidly changing world, many dynamic genres have emerged and evolved. Among all, the Disk Jockey changed the world forever. He’s a jockey, the DJ who would introduce old tracks with a modern, upbeat twist like a remix. Being the world’s first DJ, Jimmy Savile is the pioneer of this movement and since then many DJs have arrived all over the world. Every year many new artists arrive, but only a few of them successfully rule the international music industry.

Here are the Top 10 DJs in the world in 2021:

David Guetta: Instagram
  1. David Guetta

Pierre David Guetta, better known as David Guetta, has reigned in the industry for over two decades, but his songs still rock the playlist and the clubs. He’s a French DJ, record producer, music programmer, songwriter, etc. He was considered the best DJ of all time for his musical acumen and various skills. Over 30 million studio solos and 9 million albums have been sold worldwide, which puts him at the top. Guetta was voted number in 2011 by the poll of the DJ Mag TOP 100 DJs.

Musical successes – His 2009 album ‘One Love’ was a great success. Singles like ‘Sexy Bitch’, ‘Getting Over you’, ‘When Love Takes Over’, ‘Memories’, etc. are some of the pioneering tracks.

Martin Garrix
Martin Garrix: Instagram
  1. Martin Garrix

Martijn Gerard Garritsen, better known as Martin Garrix, is one of the most talented DJs and record producers in the world. Originally from the Netherlands, this Dutch DJ graduated in sound production from the University of Utrecht from the Herman Brood Academy. With his knowledge and skills, Martin provided listeners with some of the best progressive house music experiences with a dose of his individuality. He is currently the world’s best EDM DJ with the most followers on Instagram.

Musical successes – In 2015, her single “Forbidden” garnered 10 million likes on Facebook and that was just the beginning. ‘In The Name Of Love’, ‘Scared To be Lonely’, ‘Animals’ and many other tracks are part of his musical arsenal.

Tiësto
Tiësto: Instagram
  1. Tiësto

Tiësto is also a Dutch DJ heavily influenced by Martin, especially his performance at the 2004 Olympics. He claimed a lot of honor and love from his fans and followers. In 2013, The DJ Mag voted him “Best DJ of the last 20 years”. On the other hand, Mix Magazine named him ‘All Time’s Greatest DJ’. Some consider him to be the “Godfather of EDM”. He was voted “World No. 1 DJ” for three years, from 2002 to 2004.

Musical successes – His first solo album “In My Memory” was released in 2001 and since then he has released many musical hits. His third studio album ‘Elements of Life’ was nominated for the Grammy Awards.

Armin Van Buuren
Armin Van Buuren: Instagram
  1. Armin Van Buuren

Armin was born in Leiden in South Holland and developed his passion for music from an early age. He started making music as a teenager and started playing as a DJ in local bars when he was just 14 years old. As he further developed his skills, he began to broaden his perspectives in recent years and became one of the best DJs in the world. . His progressive house singles made him one of the greatest DJs with the biggest appearances on the Billboard Dance / Electronic roster.

Musical successes – With the popular radio series “A State of Trance”, six of his singles became a worldwide hit. So far the artist has released six studio albums and each of them is a hit. He received a nomination for his track “This is Something It Feels Like”.

Hardwell

  1. Hardwell

Record producer, remixer and very talented Dutch electro house DJ Hardwell have successfully become one of the greatest DJs in the world. DJ Mag voted him No. 1 DJ in the world for two consecutive years 2013 and 2014 respectively. He placed third in DJ Mag’s Top 100. The DJ is appreciated both for his singles and remixes as well as for his steadfast performances at music festivals. He released a total of eleven compilation albums and one documentary film under his label.

Musical successes – His debut album “United We Are” in 2015 was a record release that won him popularity. “Spaceman”, “Bigroom Never Dies”, “Imaginary”, “Live The Night”, etc. are some of the successes of his prolific career. ‘Summer Air’ in 2019 is still buzzing the industry.

Skrillex: Instagram
  1. Skrillex

Sonny Moore, also known as Skrillex, is an American DJ who drove the generation crazy with his music. Specializing in Dubstep, EDM, MoomBahton and electro house music, his tracks have always brought something unique and dynamic. Beginning his singing career in 2004, he gradually found his love in mixing and composition. From 2008, he started to gain attention as a versatile DJ. The artist has won eight Grammy Awards, twice the MTV Video Music Award and once the Annie Award.

Musical successes – ‘Bangarang’, ‘Nice Sprites’, ‘Scary Monsters’, etc. are some of the fiery pieces where things got pretty crazy.

Marshmello
Marshmello: Instagram
  1. Marshmello

DJ Chris Comstock, better known as Marshmello, is a talented DJ and EDM producer famous for his marshmallow headgear. With his skills and individuality, the artist has created his own “feel good” EDM genre that instantly captivates listeners. His collaborations with other artists while making remixes and compositions have helped him find his way. His songs made it to the Top 30 of the Billboard Hot 100s.

Musical successes – Some of his hit singles are “Friends”, “Wolves”, “Summer”, “Silence”, “Happier”, and the list goes on. In 2019, he released “One Right Thing”, another important step in his career.

Steve aoki
Steve Aoki: Instagram || Photo: Aldo Carrera
  1. Steve aoki

American DJ and record producer Steve Aoki is well revered for his supernatural EDM mixes. Early childhood, birthdays, first loves and all the elements of life are present in his compositions to bring an essence of youth. Breaking down all stereotypical styles, the artist is able to make enjoyable, overflowing pieces, and invites everyone to join in on an unbridled musical journey. There is overwhelming emotion or dark vibrations; only a continuous flow of pleasure and energy.

Musical successes – ‘Send It’, ‘Azukita’, ‘Are You Lonely’, ‘Hoovela’, etc. are some of the hits from his collection.

Afrojack
Afrojack: Instagram
  1. Afrojack

Nick van de Wall, better known as Afrojack, is a talented DJ and record producer from Spijkenisse in South Holland. He started composing and DJing in local pubs at the age of 14. While dabbling among the subgenres of electro house, Dutch house, minimal house, moombahton, etc. he has become one of the most dynamic artists working under the Wall Recordings label. It has been nominated several times for the Grammy and won an MTV Europe Music Awards. He regularly remains in the Top 10 of DJs in the top 100 of DJ Mag, except for the year 2014.

Musical successes – ‘Forget The World’ in 2014 was his biggest contribution.

Calvin harris
Calvin Harris: Instagram
  1. Calvin harris

Calvin Harris’ musical career began in 2007 and since then a new EDM world has emerged. This British DJ is also the richest DJ in the world who has steadily remained in the Top 10 DJs over the past decade. Throughout his musical career he has worked with many star performers like Rihanna, Ne-Yo, etc.

Musical successes – The first album in 2007, ‘I Created Disco’ is one of his greatest contributions. Success was quickly followed by her second album, ‘Ready for the Weekend’. It came no. 1 in the ranking of British albums. In 2012, her ’18 months’ album broke a record selling 923,000 copies across the UK.

Honorable mentions – If it weren’t for the Top 10 DJs, the list could go on with Late Avicii, Alan Walker, Zedd, Diplo, DJ Snake and many others who have enriched the international music industry with their compositions.





Source link

]]>
https://disc-shelf.com/top-10-djs-in-the-world-who-have-reigned-in-the-industry-for-decades/feed/ 0
Clash DJ Mix – LPM | Characteristics https://disc-shelf.com/clash-dj-mix-lpm-characteristics/ https://disc-shelf.com/clash-dj-mix-lpm-characteristics/#respond Fri, 16 Jul 2021 14:22:53 +0000 https://disc-shelf.com/clash-dj-mix-lpm-characteristics/ Ireland is a club culture paradise right now. A series of collectives on both sides of the border are making premonitory progress, with cities like Belfast, Derry, Cork and Dublin boasting a plethora of dancefloor voices. Dublin based LPM is among them, and her debut EP is now available on Monki’s & Friends label, always […]]]>


Ireland is a club culture paradise right now.

A series of collectives on both sides of the border are making premonitory progress, with cities like Belfast, Derry, Cork and Dublin boasting a plethora of dancefloor voices.

Dublin based LPM is among them, and her debut EP is now available on Monki’s & Friends label, always at the cutting edge of technology.

The EP “Voices” shows off LPM’s club prowess, but there’s a candor in this producer’s work that sets them apart from the pack.

It’s a whole-of-Ireland affair too, with contemporary Irish club SHEE running a remix. Clash invited LPM to build a mix, and it’s an intoxicating fusion of club flavors that opens up into disco territory before heading into straight, straightforward house.

Get the EP “Voices” HERE and check out the mix below.

List of tracks:
Zopelar – Cruise
DJ City – Lod pasos perdidos
Cody Currie – Agony
Kapote – Give it to me (Edit)
Magou – Heather body
Philou Louzolo Booty Grove – Samba Au Tobasco (Oh Minha Mae Edit)
Astronaut modifications – Ipkiss
Harvey Sutherland – Superego
Gay Marvine – Lost in the music
Cube Eye – Disc Two
Fouk – Winner Winner
Erol Alkan – Automatic (Palms Trax)
Nina Simone – Sinnerman (Vocal Mix Felix Da Housecat)
The Chemical Brothers – Star Guitar

– – –



Source link

]]>
https://disc-shelf.com/clash-dj-mix-lpm-characteristics/feed/ 0
All Wonder Weapons Mod Kit Upgrades and How to Get Them https://disc-shelf.com/all-wonder-weapons-mod-kit-upgrades-and-how-to-get-them/ https://disc-shelf.com/all-wonder-weapons-mod-kit-upgrades-and-how-to-get-them/#respond Thu, 15 Jul 2021 12:38:30 +0000 https://disc-shelf.com/all-wonder-weapons-mod-kit-upgrades-and-how-to-get-them/ Looking to get your hands on the new CRBR-S magic weapon upgrades in Mauer Der Toten? Here is how to find each and what they do! When you visit Berlin in Mauer Der Toten, it helps to have powerful weapons by your side. Already, players are discovering how to build Klaus, a robotic companion, in […]]]>


Looking to get your hands on the new CRBR-S magic weapon upgrades in Mauer Der Toten? Here is how to find each and what they do!

When you visit Berlin in Mauer Der Toten, it helps to have powerful weapons by your side. Already, players are discovering how to build Klaus, a robotic companion, in the new Zombies map.

And once you have it by your side, it’s possible to get the CRBR-S magic weapon for free! We recommend that you grab the weapon this way every time you drop into Mauer Der Toten.

But what exactly is CRBR-S and what is it used for? Well, the new Mauer Der Toten Magic Weapon is unique in that it can temporarily transform while fetching attachments.

Mauer Der Toten CRBR-S Wonder Weapon
(Source: Activision)

These upgrades drop frequently from zombies in Mauer Der Toten, and picking them up will change your weapon for a while. However, be aware that your weapon will revert to its base form when you run out of ammo!

The wonderful new weapon is a must-have when making the Bunny Disco Easter Egg, so be sure to pick it up!

Read more: Mauer Der Toten: How to Upgrade the Klaus Guide – All Floppy Disk Locations

Mauer Der Toten Wonder weapon upgrades explained

But which Mauer Der Toten Wonder weapon is the best and what do they all do? We have all the information you need, right here.

CRBR-S base

Base Mauer Der Toten CRBR-S

First off, the CRBR-S Wonder Weapon base looks and acts like a standard laser gun. It doesn’t look any different from the RAI K-84 that players remember from Firebase Z, except it has a spinning bullet in orbit that will shoot enemies as well.

Players are already discovering the fastest way to unlock the CRBR-S magic weapon here!

Getting an upgrade with this basic Wonder weapon will, however, leave you with a more impressive pistol.

CRBR-S swarm

Mauer Der Toten CRBR-S Swarm Mod Kit

The CRBR-S Swarm fires a swarm of lockable missiles at your target when fired. The weapon mod uses 4 ammo per shot but deals significant damage to undead.

Despite being a locking weapon, the Swarm can still be fired quickly to deal real damage and blast any enemies in your path.

CRBR-S jacket

Mauer Der Toten CRBR-S Blazer Upgrade

Obtaining the Blazer upgrade will turn your CRBR-S into a real gun, and this one is a powerhouse. Firing a laser, the weapon is excellent for dealing heavy damage to single targets or for sending mobs out quickly.

However, the Blazer does little damage to the area of ​​effect, unlike some of the other mod kits.

Read More: Warzone Vanguard WW2 Map Reveals New Aircraft Details

CRBR-S diffuser

Mauer Der Toten CRBR-S Diffuser Upgrade

On the flip side, the CRBR-S diffuser is the perfect weapon for crowd control, firing shotgun shots at incoming hordes. Get up close to hit bosses with multiple diffuser shots, or keep your distance and clear crowds with ease.

The CRBR-S is designed to be continuously switched, so don’t be afraid to swap out your Wonder Weapon with new modification kits when you find them.

You can see all of the new upgrades in action in this video in The Game Revolution below:

More Black Ops Cold War Zombies Mauer Der Toten guides:



Source link

]]>
https://disc-shelf.com/all-wonder-weapons-mod-kit-upgrades-and-how-to-get-them/feed/ 0
Mauer Der Toten: How To Build Klaus – All Rooms Guide https://disc-shelf.com/mauer-der-toten-how-to-build-klaus-all-rooms-guide/ https://disc-shelf.com/mauer-der-toten-how-to-build-klaus-all-rooms-guide/#respond Thu, 15 Jul 2021 07:35:24 +0000 https://disc-shelf.com/mauer-der-toten-how-to-build-klaus-all-rooms-guide/ Mauer Der Toten has some useful AI to help you kill the undead – here’s how to build Klaus. The last turn-based Zombies map added to Black Ops Cold War was Firebase Z back in Season 1 Reloaded. Now, 3 seasons later, we’ve finally got our hands on Mauer Der Toten, and he’s shaping up […]]]>


Mauer Der Toten has some useful AI to help you kill the undead – here’s how to build Klaus.

The last turn-based Zombies map added to Black Ops Cold War was Firebase Z back in Season 1 Reloaded. Now, 3 seasons later, we’ve finally got our hands on Mauer Der Toten, and he’s shaping up to be everything we were hoping for.

As we make our way to the new map, players are tasked with capturing the traitor responsible for unleashing the undead on Berlin. But you won’t be alone, and there’s more than a powerful new magical weapon to aid you in your fight.

In the new survival map, players can build an ally from pieces scattered around the map. When you are done putting the parts together, you have a reliable and obedient helper.

how to build klaus all parts Mauer Der Toten Black Ops Cold War Zombies
(Source: Activision)

His name is Klaus, and you might remember him from this Mauer Der Toten trailer. But putting together Klaus is going to require some real knowledge of the map.

“DO NOT HUG, HANDSHAKE OR TOP-FIVE”, Klaus’ plan bed. “KLAUS HAS NO CONCEPT OF HUMAN FRAGILITY.”

Read more: Bunny Disco Easter Egg Guide – All Locations – Mauer Der Toten

Where to find the 3 Klaus rooms in Mauer Der Toten

If you are looking to build Klaus, you will need to collect the 3 AI companion parts around Mauer Der Toten.

Make sure to power up the Mauer Der Toten and get a fancy Pack-a-Punched weapon before attempting to build Klaus.

Microwave dish

Mauer Der Toten How to build Klaus All room locations Microwave dish

For the microwave dish, head to Death Strip, directly to the right of Checkpoint Charlie where the Pack-a-Punch is located. Once in this area, you will occasionally enter a danger zone and start hearing a beep sound.

While this is happening, dig up one of the nearby debris piles to collect the microwave dish part.

Next, head to the Clothing Factory and place the Microwave Disk on the Upgrade Station.

Battery part

Finding Klaus’ battery part is easy, just make it to turn 10 and face the Krasny Soldier. We first saw the special armored enemy arrive in Hatch mode, and defeating them here will drop a battery on you.

Then take this battery to the underground safe house and insert the battery into Klaus’ body.

Read more: Mauer Der Toten: The Fastest Way to Unlock CRBR-S Magic Weapon

Part of Klaus’ hands

Finally, to get Klaus’ hands back, we need to turn a zombie into an ally. Using either the Brain Rot Ammo Mod or the Elemental Pop Perk, get a member of the living dead under your control.

You’ll want to do this in hotel room 304. Your new undead friend will immediately rush to a barricaded door and smash it for you.

It is in this same room that you can collect the free magic weapon in Mauer Der Toten! However, there are a few more steps you will need to do first, including getting Klaus online!

Approach Agent Jack on the bed and collect Klaus’ hands around his neck. Tie hands to Klaus in the safe house.

From that point on, your tactical grenade will control Klaus, who will join you in your fight against the hordes of the living dead. He will revive you even when you are downed!

But that’s not all! You can now upgrade Klaus to give him some serious firepower and a new look!

Thanks to The Game Revolution for providing this excellent video guide.

More Black Ops Cold War Zombies Mauer Der Toten guides:





Source link

]]>
https://disc-shelf.com/mauer-der-toten-how-to-build-klaus-all-rooms-guide/feed/ 0
King’s College London honors former student DJ Cuppy with Award Nigeria news https://disc-shelf.com/kings-college-london-honors-former-student-dj-cuppy-with-award-nigeria-news/ https://disc-shelf.com/kings-college-london-honors-former-student-dj-cuppy-with-award-nigeria-news/#respond Wed, 14 Jul 2021 12:00:17 +0000 https://disc-shelf.com/kings-college-london-honors-former-student-dj-cuppy-with-award-nigeria-news/ Nigerian billionaire Femi Otedola’s daughter DJ Cuppy was recently honored by her former school in London Nigerian celebrity disc jockey was awarded an award by King’s College London and she took to social media to share the good news Cuppy also had the opportunity to perform and she remembered her time as a student at […]]]>


  • Nigerian billionaire Femi Otedola’s daughter DJ Cuppy was recently honored by her former school in London
  • Nigerian celebrity disc jockey was awarded an award by King’s College London and she took to social media to share the good news
  • Cuppy also had the opportunity to perform and she remembered her time as a student at the institution.

PLEASE NOTE: Legit.ng’s mission is to support vulnerable children in Calabar – join the initiative on Patreon, let’s change more lives together!

The famous Nigerian disc jockey, Florence Otedola aka DJ Cuppy, was recently honored by King’s College London.

The billionaire’s daughter was honored by the institution she was studying at and took to her social media page to share the good news with her fans.

Not stopping there, Cuppy revealed that she also had the opportunity to perform and started sharing an exciting video of herself with her DJ mix.

Read also

Billionaire Temi Otedola’s daughter ‘trains’ mom to join her playing dress-up for TikTok video

King's College London, DJ Cuppy
King’s College London honors DJ Cuppy with an award. Photos: @cuppymusic
Source: Instagram

PLEASE NOTE: Click “See First” under the “Next” tab to see Legit.ng News on your Facebook news feed!

In the caption of the post, Cuppy remembered her time as a college student and said she will never forget those times.

In his words:

“DJ Set for King’s College London!

“I was just honored by @KCLAlumni with an award! Best of all, I got to play… I will never forget my days as a student! #DistinguishedKings.”

See his post below:

ATTENTION: join the Legit.ng Telegram channel! Never miss important updates!

Nigerians respond to the good news

A number of Cuppy fans have taken to her comments section to celebrate the good news with her. Some of them also revealed that they like his DJ. Read what some of them had to say below:

Jaybuoi:

“Grand Cuppy”

Officialqueens_kitchen:

“Cuppy love …. Come on girl.”

Felicityfashionhub:

“Keep killing him mom.”

Hollamoren_hadassah:

“I love this Sha girl, she’s cool and strong.”

Read also

Ecstatic actress Jaiye Kuti shares photos of the car she received as a surprise birthday present

Pretty.

Temi Otedola and her mom dress up for TikTok

In other news related to the Otedola family, Legit.ng reported earlier that one of the billionaire’s other daughters, Temi, recently dragged her mother, Nana, to play dress-up for TikTok.

Temi rocked a simple white shirt and blue jeans to match white mules.

Her 55-year-old mother, meanwhile, appeared to steal the show with her sequined pants and high-top shoes.

Nana paired it with a black top and also left her speckled gray hair in an afro. Her look seemed to set the mood for disco days.

ATTENTION: Do you have any news to share? Contact Legit.ng instantly

Source: Legit



Source link

]]>
https://disc-shelf.com/kings-college-london-honors-former-student-dj-cuppy-with-award-nigeria-news/feed/ 0
Staff Walks: Intense Primer S by Photographer Nathan Hughes https://disc-shelf.com/staff-walks-intense-primer-s-by-photographer-nathan-hughes/ https://disc-shelf.com/staff-walks-intense-primer-s-by-photographer-nathan-hughes/#respond Mon, 12 Jul 2021 07:05:10 +0000 https://disc-shelf.com/staff-walks-intense-primer-s-by-photographer-nathan-hughes/ STAFF TRAVEL Intense Primer S by Nathan Hughes “Never buy a car in the rain” is always the advice. A good recommendation that definitely extends to bikes as it hides scratches and gives the machine a completely unfair shine. This bike is not for sale so I hope you will forgive the free use of […]]]>


STAFF TRAVEL

Intense Primer S by Nathan Hughes


“Never buy a car in the rain” is always the advice. A good recommendation that definitely extends to bikes as it hides scratches and gives the machine a completely unfair shine. This bike is not for sale so I hope you will forgive the free use of moisture to improve it. For maximum effect, on an already very humid day, I took it to a lumberyard that had intermittent sprinklers to preserve the wood, also making the photography more fun.

They have made a strong claim to creating ‘striking mountain bikes since 1993’, and the striking part is something that I personally engage with. There’s no way I’m not one-sided, having been the DH team’s photographer for the past few seasons, but I find the bikes exciting and I feel a nice pinch of nostalgia for the entire history of the racing under the greats like Kovarik, Palmer and now Gwin. Anyway, the release of this “mixed-wheel corner sculptor,” as Pinkbike dubbed this mule bike at the end of 2019, piqued my interest. Mostly, if I’m being honest, because of its pointy look and racy stripes than anything else. As a photographer and esthete rather than an athlete, I try to admit the purely visual appeal without shame.

PB testers Mike Levy and Mike Kazimer found the original Primer S “mind-blowing in the corners”, but they also had quite a few bad things to say about the bike in the Field test. As someone said in the comments “I wanted this bike to be better” … so did I, so I tried to make it that way. The last mule I owned was straight out of college in 2009 and it was a success. However, early employers disagreed and mules are still controversial to this day.

Origins of actions

The bike began its journey to improved beauty and performance (strictly as a side benefit) as a stock model for 2020. Among other differences it came with the Fox DPX2 Float shock and the 2020 Fox 36 fork with the Fit4 shock absorber. It was fitted with Shimano XT brakes on 180 rotors, E13 alloy rims and, most notably, a Maxxis Rekon plus tire at the rear. *Chills*. Why not opt ​​for Carbine or Full 29 Primer? Since I have fairly long legs, a mule might not be that “necessary” for me, but then the idea of ​​blowing my left and right was appealing to me. Plus, as mentioned, there was the must-see draw of the paint.

Custom Build 2020 Intense Primer S

• Intended use: All-Mountain / Enduro
• Displacement: 160 mm at the front, 140 mm at the rear
• Wheel size: Mullet 29 / 27.5 in.
• Frame construction: carbon
• Head angle 63.5 ° (ish)
• Base length: 440 mm
• Size L
• Weight: 33.5 lbs / 15.2 kg
• Price: $ 5,799 plus major extras
• Color: Black / gray
www.intensecycles.com

I had a Tracer for a few years and loved it, but the Primer was more fun and felt better right off the bat, even with less travel. Still, I recognized the limitations of the bike outlined in reviews and envisioned the next steps to fix it. And yes, as a person without Monaco plates and without a catamaran, I am very aware that I have the chance to work in the bicycle industry.Nathan Hugues

Angles

Did that ruin the climbs by installing a longer fork and removing the oversized Rekon supporting the rear? How can we further spoil the already wasted misery of the escalation itself? Without getting so philosophical, I like to think of the extra 10mm being spent as sag and comes with a 63 point harder head angle for descents. He could still slack off with the flip chip in “lower” mode, which could be a nice ode to owning a Yeti DH9 years ago.

Maybe it’s the Grip2 damping system, maybe the extra stroke I’m not sure, but the new 36 is a butter front wheel mount and seems to stay higher in the stroke on the brakes than the original 2020 version. Other perks include that I can now use the new Fox mudguard, which looks made up and will keep used zippers out of sea turtle nostrils. No man tells me not to have fork tokens; I run them plug and play.

Full specification

Fork: 2021 Fox 36, 160mm

Shock: Fox DHX2, 550 lb spring

Wheels: ENVE M730 29 ‘(F) & M735 27.5’ (R)

Brakes: Hope Tech 3 V4, 200mm (F) and 180mm (R)

Tires: Schwalbe Ultra Soft Magic Mary (F&R)

Handlebars: Renthal Carbon Fatbar 35, 785mm

Stem: Renthal Apex 40mm

Pedals: Hope F20 flats

Transmission: Sram Eagle XO mechanical, GX shifter

Cranks: Truvativ Descendant

Grips: DMR Deathgrip (thick camo with straps)

Centers: Chris King

Saddle: Fizik Antares carbon rail

Dropper: Fox Transfer and Raceface shifter

Lots of carbon

ENVE rims are hard to miss and complete a mostly carbon construction on the bike. They are quite loud and proud and after the first few laps for fear of crushing them and blowing them up, I really appreciate the feeling of liveliness they bring to the lap. I’ll probably have to pay more attention to tire pressure than I ever cared about on alloy rims, but that sounds like a great lesson in life.

At the back, I decided to use a Magic Mary for maximum grip. This appeal was probably reactionary after riding the oversized stock tire for too long with such a low tread. Still, the bite is definitely back and I’m not bothered by a little extra rolling resistance. The Aero spokes and “non-flat” rim tape are very cool touches to the wheels and made an afternoon hell on earth by fitting the Marys to a worthwhile 35mm rim.

A Renthal cockpit was an easy choice to bring light resistance and a bit more graphite gray and gold to the overall look. Continuing the carbon theme, I chose to use a light and tidy 155g Fizik Antares saddle and stick with the perfectly adequate Truvativ Descendant cranks that came with the bike.

British brakes

Huge Hope Bulb hubs in anodized red adorned my very first downhill bike and I have admired Hope’s CNC artwork ever since. It is true that with a wide range of color customization options comes great responsibility, but I don’t think the orange and gold touches are too important for this setup. Upgrading to a 200m rotor up front and 4 piston caliper at the rear certainly helped stop, but since he’s a mule, I figured I’d better stick with the small rotor in the back or to lock all the way up the mountain.

Added to cart

As a flat lifer pedal, the very thin Hope F20 pedals with their impeccable machining make me happy. I never learned to hang on and while I’m certainly pretty old by now, my home terrain of Chamonix just doesn’t seem like the best place to get in when a few hundred vertical meters of ‘cycling’ is always a possibility. You don’t want metal clogs for that. DMR Deathgrips made me change my mind about thicker grips and a BMX style bridle never goes out of style, just like camouflage. Chris King stealth hubs came with the wheels and the original Fox dropper keeps the Kashima dream alive under the saddle. As for the stock SRAM Eagle drivetrain, while it was good enough for the dreaded soldiers of Ancient Rome, it is good enough for my ATV.

Blow yourself up

Both the observer and the cynic would be quick to point out that the 2021 Primer S already came with a coil damper … and in an incredible Ferrari red. This was all unknown to me a year ago, but I was on the same line of getting the grip of the DH bike and pumping up small bump sensitivity. I consider the DHX2 to be the real game changer on all build upgrades. Seamless actuation is nice and flat turns are now a closer friend. € 800 and something plus spring seems to be a stretch for this upgrade, but we must not forget that money is a construct with no real existence in this universe other than the human mind.

But it’s not even clear

It certainly brings a tear to the eye; all the semi-extravagant upgrades have somehow only added more volume. The original Primer S weighed 13.6 kg, although it was medium in size and without pedals. Granted, what was lost in the wheels was slapped by swapping the Fox Float for the DHX2 coil, the latter weighing almost double the former. The sturdy housing of the Magic Marys is a big part of that as well, but with the ENVEs in play, I’ll take the extra weight of the padding. I suspect the fork is a bit heavier, but now I can land 10mm bigger drops. Anyway, the bike weighs 15.2kg no matter how many times I reset the scale.

How does it roll?

I’m not a veteran tester or a seasoned athlete, but on the hill what I tend to time is the sound of the best bikes and super quiet is the only order of the day when racing. This bike is totally silent, okay in part because it’s still fairly new, but in part and I say, mainly because it rolls so easily. At the same time, it’s a crisp feel, perhaps more aggressive than the Tracer, Intense’s true enduro charger. Riding is decent; there is hardly any bob even without using the climb switch and the seat post angle is totally bearable, although I’m not a climber connoisseur. To conclude; this bike is super fun and i like the way it looks which makes me think i ride better; ergo the bike is faster. By the way, this build also makes me, or anyone who tries to emulate its predominantly carbon tendencies, much poorer. Something Intense is not the only one to be criticized. However, you only have YOLO once.



Source link

]]>
https://disc-shelf.com/staff-walks-intense-primer-s-by-photographer-nathan-hughes/feed/ 0
Mitch Bag’s New Single “Fake It To A Place” Is A Haunting Neo-Disco Odyssey https://disc-shelf.com/mitch-bags-new-single-fake-it-to-a-place-is-a-haunting-neo-disco-odyssey/ https://disc-shelf.com/mitch-bags-new-single-fake-it-to-a-place-is-a-haunting-neo-disco-odyssey/#respond Thu, 08 Jul 2021 01:35:26 +0000 https://disc-shelf.com/mitch-bags-new-single-fake-it-to-a-place-is-a-haunting-neo-disco-odyssey/ Words by Arielle Richards ‘Fake It To A Place’ combines 70s glamor with modern rhythm. Future singer-songwriter Mitch bag released their second single, “Fake It To A Place” with a shimmering visualizer to accompany the track. While the song’s uptempo disco beat lends its light and glamorous air to the song, the lyrics take on […]]]>


Words by Arielle Richards

‘Fake It To A Place’ combines 70s glamor with modern rhythm.

Future singer-songwriter Mitch bag released their second single, “Fake It To A Place” with a shimmering visualizer to accompany the track.

While the song’s uptempo disco beat lends its light and glamorous air to the song, the lyrics take on a much deeper meaning.

Keep up to date with all the latest music interviews, news and reviews here.

The song is based on the idea of ​​“pretending until you do it,” or, in Bag’s own words, “Sometimes in life, pretending in a place where you aren’t stressed out is. the best you can do. “

“I love disco and the drama it embodies, so it just felt natural that such a painfully personal song be glamorized into a frenzy of dance rhythm,” he says.

The sister of the Melbourne-based musician, Ollie Olivia, joins him on the track – his voice is the perfect accompaniment to evoke the shimmering and evocative vibe of the party scene of the late 70s.

While Bag often finds himself creating disco-style tracks – something he inherited from his former father “Disk Jockey” – “Fake It To A Place” effortlessly applies a more modern techno rhythm to his production, melting the song in 2021.

The accompanying visualizer for the track evokes a very Miami ambiance, heavily inspired by clubhouse aesthetics, fast cars and sequined dresses – all perfectly tailored to match the melodic, groovy tone of the track.

Already broadcast on triple j the very week of its release, “Fake It To A Place” is sure to resonate with audiences of all ages, whether for the love of disco or for the deeper meaning of lyrics.

Either way, Mitch Bag is absolutely one to watch.

Check out “Fake It To A Place” below.

“Fake It To A Place” is now available on all streaming platforms. Stay up to date with Mitch Bag here.





Source link

]]>
https://disc-shelf.com/mitch-bags-new-single-fake-it-to-a-place-is-a-haunting-neo-disco-odyssey/feed/ 0
Taiwanese semiconductor giant TSMC aims for further advancements in Japan https://disc-shelf.com/taiwanese-semiconductor-giant-tsmc-aims-for-further-advancements-in-japan/ https://disc-shelf.com/taiwanese-semiconductor-giant-tsmc-aims-for-further-advancements-in-japan/#respond Thu, 01 Jul 2021 07:05:05 +0000 https://disc-shelf.com/taiwanese-semiconductor-giant-tsmc-aims-for-further-advancements-in-japan/ ~~ ~ The industry giant Taiwan Semiconductor Manufacturing Company’s (TSMC) plan for a new research and development (R&D) project in Japan has won backing from the Japanese government. TSMC will work with Japanese manufacturers of materials and manufacturing equipment in pursuit of new semiconductor advances. Japan’s share of semiconductors accounts for about 10% of this […]]]>


~~

Tokyo during COVID-19: Green spaces and rise of teleworking offer new lifestyle opportunities

~

The industry giant Taiwan Semiconductor Manufacturing Company’s (TSMC) plan for a new research and development (R&D) project in Japan has won backing from the Japanese government. TSMC will work with Japanese manufacturers of materials and manufacturing equipment in pursuit of new semiconductor advances.

Japan’s share of semiconductors accounts for about 10% of this strategically important sector for both the economy and the self-defense forces. And, although land subsidence continues, it is a significant part of related materials and equipment.

Japan’s strengths were the deciding factor in TSMC’s decision to expand. The company has accelerated its response to changes in semiconductor technology.

The ultimate goal of Japanese government support is to attract advanced factories. For Japan, the opportunity to increase domestic supply has arrived.

What’s in the case

On May 31, the Ministry of Economy, Trade and Industry (METI) announced that it would contribute approximately 19 billion yen (172 million US dollars) in the form of a grant in response to TSMC’s R&D in semiconductor manufacturing technology in Japan. The total cost of the project is around 37 billion JPY (about 335 million US dollars), of which about half is subsidized.

Previously, TSMC announced in March the establishment of the wholly owned subsidiary TSMC Japan 3DIC Research and Development Center. This 3DIC center will set up an inspection line in a clean room at the base of the National Institute of Advanced Industrial Science and Technology in Tsukuba City, Ibaraki Prefecture, from summer 2021, and will begin large-scale research in 2022.

Japan, although a good environment for R&D, is relatively expensive, taking into account factors such as fixed costs. TSMC, an industry leader, has decided to enter Japan anyway, and it’s not just risk diversification that they have in mind. It seems that the company is also focusing on the high level of Japanese technology related to semiconductors.

More than 20 Japanese companies are participating in the joint research. Materials manufacturers include Asahi Kasei, Ibiden, JSR, Shin-Etsu Chemical Co., Shinko Electric Industries, and Fujifilm. Keyence, Shibaura Mechatronics, Shimadzu Corporation and Disco Corporation, among others, cooperate as equipment manufacturers.

According to METI, Japan owns about 60% of the total silicon wafers, which serve as printed circuit boards for semiconductors and are a strength of Shin-Etsu Chemical Co. For resists (photosensitive agents) essential for circuits. , that JSR and others are working on, Japan’s share is about 70% of the world total. In addition to the importance of resins as the main material, about 90% of manufacturing equipment also applies this material to the surface of printed circuit boards.

The grant was dedicated to R&D related to the second part of the semiconductor manufacturing process. Changing trends have placed this field in the spotlight, and TSMC has deemed its development insufficient so far.

Japanese know-how

Semiconductor production is divided into two processes. In the first part, electronic circuits are written on disc-shaped wafers with light.

In the second part, square-shaped chips are cut from wafers with etched circuits. Then they are connected to the printed circuit board with wiring and other materials, and integrated into the product.

Until now, the race has been about making the circuits ー laid out in the first part of the process as thin as possible. If the circuits are thinner, more transistors (elements) can be integrated and the operating performance is improved. In addition, with higher circuit density, the chip area can be reduced and more chips can be made from a single wafer, resulting in lower production costs.

The most advanced on this front are semiconductors with 2 nanometer wide circuits, pioneered by TSMC and others. (1 nanometer equals 1 billionth of a meter). It is one-twentieth the width of major semiconductors in Japan.

The innovations of the first part of the process improved the performance of semiconductors and the added value of the second part was considered low. However, while the number of transistors on an integrated board has doubled every two years over the past 50 years, because Moore’s law proposes, and innovation has continued by increasing the density of transistors, it is becoming clear that this is approaching its limit. Other means are needed to continue to improve the performance of semiconductors.

The world has thus turned to the second part of the manufacturing process, in particular “3D packaging”. It consists of stacking several chips with different capacities and combining them into one bundle.

By replacing the increase in the density of transistors, which should stagnate, the objective is to stimulate technological innovation by making semiconductors more and more three-dimensional. TSMC’s R&D will focus on establishing this area.

At the same time, it is difficult to accurately stack small chips to make it a successful product. It is essential to consider various aspects such as materials, processing and assembly, in order to achieve this. It is for this purpose that TSMC has partnered with Japanese manufacturers who excel in materials and device technologies.

Looking for a strong role in the sector

By strengthening the relationship with TSMC, Japanese material and equipment manufacturers can not only expect large orders from them in the future, but also have the potential to become the world leader in 3D packaging.

METI’s device and semiconductor strategy office expects Japan’s strengths to come in handy. Beyond the joint research, an offer from TSMC for a factory focusing on the second part of the semiconductor manufacturing process can also be considered. In addition, an offer for a factory concentration of the first part may also be considered.

Japan, which was once the world leader in semiconductor production, has lost its position because it missed the global trend of dividing development and production to improve efficiency. The gap in semiconductor development capabilities has widened and it is “impossible to catch up,” semiconductor industry officials say. Likewise, it is no longer possible for Japanese companies to independently produce advanced semiconductors.

Meanwhile, Japan has survived in sectors of the global materials and equipment market. With this as a tool, Japan must attract factories of semiconductor companies to countries and regions with similar values, and increase the domestic supply capacity of advanced semiconductors.

An evolving industry

The semiconductor industry is changing rapidly. Samsung Electronics of South Korea and Intel of the United States are also embarking on strengthening the second part of the manufacturing process, which is growing in importance.

In addition, the United States announced that it would invest 5.7 trillion JPY (approximately US $ 51.5 billion) and the European Union (EU) approximately 19 trillion JPY (approximately 172 billion US dollars). US) in semiconductor related fields. If these huge sums of money are invested in accelerating the expansion of factories, and the related fields are strengthened in parallel, there is a chance that Japan’s technological advantage will diminish.

In fact, it may be causing Japanese material and equipment manufacturers to move overseas, leaving the domestic market empty. The plan to attract factories to Japan could also fail.

Japan also has a fund to support semiconductor development, but it is only at the scale of JPY 200 billion yen. To launch mass production in Japan, which currently imports more than 60% of its semiconductors, large investments such as Europe or the United States are necessary.

In order not to lose the opportunity and increase its self-sufficiency in semiconductors, the public and private sectors in Japan must discuss and work together to stimulate investment.

(Find access to this report by Sankei Shimbun in Japanese on this link.)

Author: Katsufumi Sato, Department of Economic News, The Sankei Shimbun



Source link

]]>
https://disc-shelf.com/taiwanese-semiconductor-giant-tsmc-aims-for-further-advancements-in-japan/feed/ 0
EDITORIAL | Expectations are high as Japan resumes operation of 40-year-old nuclear reactor https://disc-shelf.com/editorial-expectations-are-high-as-japan-resumes-operation-of-40-year-old-nuclear-reactor/ https://disc-shelf.com/editorial-expectations-are-high-as-japan-resumes-operation-of-40-year-old-nuclear-reactor/#respond Wed, 30 Jun 2021 23:55:40 +0000 https://disc-shelf.com/editorial-expectations-are-high-as-japan-resumes-operation-of-40-year-old-nuclear-reactor/ ~~ ~ Kansai Electric Power’s Mihama nuclear power plant, in operation for more than 40 years with a capacity of 826 MW, was put back into service on June 23. This is the first resumption of operation of a reactor more than four decades old since the entry into force of the “40-year rule” following […]]]>


~~

Tokyo during COVID-19: Green spaces and rise of teleworking offer new lifestyle opportunities

~

Kansai Electric Power’s Mihama nuclear power plant, in operation for more than 40 years with a capacity of 826 MW, was put back into service on June 23.

This is the first resumption of operation of a reactor more than four decades old since the entry into force of the “40-year rule” following the accident at the Fukushima Daiichi nuclear complex in March. 2011 from Tokyo Electric Power (TEPCO).

RELATED: Nine years since the triple Fukushima disaster: wounds still healing, region struggles to recover

The rule limits the life of a nuclear reactor to 40 years of service, with a maximum extension of 20 years. Power transmission restarted on June 29 and, if all goes well, it will go into commercial operation at the end of July.

Until Mihama, only nine of the country’s 33 reactors had resumed operations. Others had been shut down since 2018, when four reactors were restarted.

With the reactivation of the Mihama n ° 3 unit, commissioned in 1976, the number of reactors in operation will rise to double digits. This is a step forward towards guaranteeing a stable electricity supply for the country and reducing greenhouse gases, as provided for in the Paris Agreement on climate change.

RELATED: EDITORIAL | Balance the environment and the economy by setting the goal of zero greenhouse gas emissions

There is also the case of the Tokai No. 2 nuclear complex of Japan Atomic Power Co. in Tokaimura village, Ibaraki prefecture. There, opposition from residents prevented restarting the reactor, even though it successfully passed the safety review of the Nuclear regulatory authority (NRA), Japan’s nuclear watchdog. We welcome the forward-looking measures taken by the city of Mihama and the prefecture of Fukui to pave the way for the resumption of electricity production.

A group of protesters against the reopening mingle with journalists and onlookers.

Delays in restarting nuclear reactors and reduced thermal energy production have combined to strain the country’s power supply. The Ministry of Economy, Trade and Industry (METI) has warned that Japan’s power reserve in the Kansai region during peak power demand periods will decline by about 3.8% in August 2021 and around 3% in February 2022.

Given the circumstances, the resumption of Mihama’s No.3 reactor, which contributes to the country’s basic electricity supply, is certainly good news. However, construction work on the implementation of the reactor counterterrorism measures has been delayed. The operation of the reactor must be suspended if it does not meet the legal deadline of 25 October. Unfortunately, this will contribute to an increased risk of power outages over large areas if the heavy snowfall and other severe winter weather conditions seen last winter are repeated.

At the same time, failure to meet the deadline will not necessarily lead to an immediate change in the terrorist risk for the reactor. Should the government not review its regulatory system and ensure that it is flexible enough to weigh the delay in construction against the realistic danger of major blackouts due to power cuts?

The extension of the operation of aging reactors is also practiced in countries such as the United States and France to upgrade existing reactors. Extending reactor life is particularly important in Japan, where adding new nuclear reactors has become difficult since the Fukushima disaster. Kansai Electric, for its part, is well aware of this. There can be no recurrence of nuclear energy scandals.

The government should clearly integrate the use of aging reactors into the Basic Energy Plan as it prepares its reviews.

RELATED:

(Lily The Sankei Shimbun editorial in Japanese on this link.)

Author: editorial board, The Sankei Shimbun



Source link

]]>
https://disc-shelf.com/editorial-expectations-are-high-as-japan-resumes-operation-of-40-year-old-nuclear-reactor/feed/ 0
How to format a large hard drive with FAT or FAT32 https://disc-shelf.com/how-to-format-a-large-hard-drive-with-fat-or-fat32/ https://disc-shelf.com/how-to-format-a-large-hard-drive-with-fat-or-fat32/#respond Wed, 30 Jun 2021 15:21:00 +0000 https://disc-shelf.com/how-to-format-a-large-hard-drive-with-fat-or-fat32/ Windows does not make it easy to format a partition larger than 32 GB with the FAT32 file system. However, FAT32 supports up to 16TB hard drives, and most operating systems allow up to 2TB. The Windows 32GB restriction is an artificial limit that you can bypass. We are going to show you how to […]]]>


Windows does not make it easy to format a partition larger than 32 GB with the FAT32 file system.

However, FAT32 supports up to 16TB hard drives, and most operating systems allow up to 2TB. The Windows 32GB restriction is an artificial limit that you can bypass.

We are going to show you how to format large hard drive with FAT / FAT32 or create partition 32GB and above with this file system.

FAT32 FAQ

The File Allocation Table (FAT) file system is a relic of the 1970s. It may be older than most current operating systems, but it is still useful.

FAT vs FAT32 vs exFAT: what’s the difference?

The main difference between FAT, FAT32, and exFAT is in the volume and file size limits.

FAT, the original version of this file system designed for floppy disks, could maintain an 8-bit record of data clusters stored on the disk. With FAT32, this went down to 32 bits. exFAT is the 64-bit version of the FAT file system. With each increase, the maximum volume and file size supported by the file system also increased.

The maximum file size supported by FAT32 is just under 4 GB. If you need a cross-compatible file system that supports larger files, exFAT is the way to go. In fact, with exFAT, the file size limit is slightly less than 16 EB (Exbibyte) or 1.845e + 7TB. Basically, the size of the exFAT file is unlimited.

Why would anyone still want to use FAT32?

People still use FAT32 because it is a universally recognized file system. When you need to transfer files between different operating systems or between your camera or Android phone and your Windows computer, you will probably need a drive in the FAT32 format.

Why has Microsoft limited the size of the FAT partition?

Microsoft has set a 32 GB partition size limit for the FAT / FAT32 file system to promote NTFS, which is generally more efficient when working with large partitions. This limitation only exists in recent versions of Windows. In addition, Windows recognizes large hard drives formatted in FAT / FAT32.

If you don’t want to mess around with the command line for manual formatting, you can use tools that apply the same principle but provide a nice graphical user interface (GUI) for your convenience.

FAT32 format

Format FAT32 dialog box after formatting a 123 GB USB stick with FAT32.

The FAT32 format is a single-task portable GUI tool that does not require installation. Its only job is to format the drives with FAT32, and it does it incredibly well.

FAT32 format works with Windows XP to 10 and supports partition size up to 2TB. You can choose the size of the allocation unit and assign a new volume name to the partition. Unfortunately, it cannot create new partitions.

EaseUS Partition Master

Partition window in EaseUS Partition Master format.

EaseUS Partition Master is a superior alternative to Windows built-in disk management tool. It allows you to manage your partitions and format them to FAT32. Don’t let them trick you into purchasing the paid version until you’ve tried the free version, which is enough for most users.

Right click on the drive you want to format and select Format. In the Format the partition window, add a label, select the desired file system, choose a cluster size, and then press Okay. EaseUS Partition Master can queue multiple operations. When you are ready, click the execute button top right to start.

Fat32Trainer

FAT32Formatter progresses while formatting a drive.

Windows 7 users can also try Fat32Formatter. It’s a self-running tool with a decent GUI that lets you format large hard drives with FAT32. The bubbles guide the user through his functions. No other document is available. While we could get this tool to work in Windows 10, it has been hit and miss.

This tool is almost too simplistic. Although you can delete a partition and create new ones, you cannot choose the size of the allocation unit.

If you want to manage your partitions, i.e. create new ones or change their size, I recommend using dedicated software. First, create a partition that you want to format with FAT32. Then if your partition manager cannot do it, use any of the above tools to perform FAT32 format.

How to format a drive with FAT or FAT32 manually

Warning: Several readers commented that this method failed with a “volume too large for FAT32” error after several hours. To avoid frustration, use a third-party tool or try the quick format option below.

Do you still want to try the manual approach? Rather than using the standard Windows formatting tool, go to the command line.

In Windows 10, right-click the Start button to launch the advanced user menu and select Windows PowerShell (administrator) or Command prompt (administrator). Then enter the following command at the prompt, while “X” is the drive letter of the external device you want to format:

format /FS:FAT32 X:

Hit Enter to execute the command.

Format via Command Prompt

Alternatively, if you don’t want to wait for hours, encounter an error with the above command, or generally want to avoid third-party tools, you can also try the quick format command:

format /FS:FAT32 /Q X:

Note that quick format will only delete the file table. It will not erase or overwrite files currently written to the drive. But if you want to completely erase a hard drive, we’ve shown you how.

Are you having problems? Find out how to fix the “Windows could not complete formatting” error.

FAT formatting a large hard drive

FAT and FAT32 remain popular file systems because they are cross-platform. If you are moving disks between multiple operating systems, you will need a widely supported format.

However, depending on the platforms you are using, you should also consider exFAT as it is supported by Windows, Linux, and newer versions of macOS and has virtually no limit on the size of individual files.

Image Credit: nipastock / Shutterstock


reformat-external-hard-drive
How to reformat an external hard drive without losing everything

Worried about losing data on your corrupted hard drive? Here is how to reformat the hard drive so that you can recover your data later.

Read more


About the Author

.





Source link

]]>
https://disc-shelf.com/how-to-format-a-large-hard-drive-with-fat-or-fat32/feed/ 0